|
The Frame
|
Step 4: Make and place the stand-offs
1. On one side of all 4 the stand-offs, glue an end cap of 3 mm tight with superglue.
|
2. At the other side of each stand-off, glue the sail connector or the Jaco-connector.
3. If you use Jaco-connectors, remove the rubber stop rings from the connectors.
|
|
4. Place the short stand-offs in the holes that are closest to the spine.
|
|
5. Place the long stand-offs in the other holes (furthest away from the spine).
6. If you use Jaco-connectors, put the rubber stop rings back and press these against the sail.
|
|